On-Vehicle Intelligent Monitoring Platform
Your Fleet.
Your Data.
No Monthly Fees.
Novico Fleet installs on the dash in 15 minutes, performs analysis on your engine's J1939 data in real time, and generates a scored diagnostic report after every trip — automatically. Buy the hardware once. Own it forever.
See the Post-Trip ReportWorks With Every Fleet
Any engine. Any fuel. Any fleet.
The Problem
Your Telematics Tells You Where. Novico Fleet Tells You What.
On-vehicle real-time analysis prevents breakdowns — and until now, that meant expensive subscriptions, cloud dependencies, or a laptop in the shop.
Breakdowns Are Preventable
Active fault codes, sub-system failure trends, and thermal anomalies appear in the data long before a truck goes down. Novico Fleet surfaces them in plain English — before the driver calls in.
Every Trip is Documented
A scored, categorized post-trip diagnostic report is generated automatically after every run — including fuel efficiency, driver behavior, and engine health. No driver or technician input is required.
No Subscriptions. No Surprises.
Novico Fleet is hardware and software you own. Buy it once, run it forever. Your data stays on your equipment, not on third-party SaaS servers.
ROI No-Brainer
Own It For What You'd Pay in a Year
The Enterprise Kit with Terminal Connectivity runs roughly $685 per truck — comparable to one year of a telematics subscription. Except you never pay again.
Savings: 100% of subscription cost after first year| Subscription Telematics | Novico Fleet | |
|---|---|---|
| Year 1 Cost | ~$685/truck | ~$685/truck |
| Year 2 Cost | ~$685/truck | $0 |
| Year 3 Cost | ~$685/truck | $0 |
| Data Ownership | Their servers | You own it |
How It Works
Three Steps to Complete Fleet Intelligence
No cloud logins. No complex setup. Novico Fleet connects directly to your vehicle's J1939 backbone and gets to work immediately.
Install in 15 Minutes
Connect two wires to the J1939 CAN bus. No ECM reprogramming. No dealer visit. Works on any diesel, CNG, propane, or hydrogen vehicle.
Any Vehicle → Any FuelMonitor Every Mile
10Hz real-time sampling of 50+ J1939 parameters. Fault codes, fuel economy, driver behavior, temperatures, pressures — all on the dash display.
Live DashboardReport Generates Automatically
At trip end, a complete scored diagnostic report is ready. Retrieve it via WiFi from any browser — or let the Terminal harvest it automatically when the truck returns to base.
No Driver Input RequiredCore Capabilities
Everything Your Shop Tech Needs. Nothing They Don't.
Built for the technician who needs answers, and the fleet manager who needs accountability.
J1939 Fault Diagnostics
Decodes DM1 fault codes with plain-English SPN descriptions. Active DTCs display on-screen with lamp indicators. Clear faults directly from the gauge — no scan tool needed.
Scored Post-Trip Reports
Multi-dimensional scoring: Fuel Efficiency, Driver Behavior, Engine Health, and Maintenance Needs — generated automatically at the end of every trip.
Driver Behavior Scoring
Composite 0–100 score based on hard braking, acceleration, cornering, speed compliance, and idle time. Onboard G-force event detection with configurable thresholds.
Event Capture
When something happens, you have the data. Driver presses CAPTURE and the gauge freezes a 20-second window of all before/after vehicle data at 10Hz — saved as timestamped JSON.
WiFi Dashboard — No App
Built-in secure web server. Connect any phone or tablet, no app to install. Live data, fault history, settings, and firmware updates — all from a browser.
ECU Parameter Snapshots
Freeze-frame of critical engine parameters captured at trip end. Speed, throttle, coolant temp, oil pressure, battery voltage, boost — everything your tech needs before opening the hood.
Post-Trip Report
The Report That Changes How You Manage Your Fleet
Every trip generates a comprehensive diagnostic report — automatically, with no driver input. It's a scored, categorized, actionable maintenance document that tells your service team exactly what needs attention before the next trip.
See Full Sample ReportOptional Upgrades
Expand Your Options
Novico Fleet is fuel-agnostic at its core. Optional software modules unlock specialized monitoring for your specific operation — available on any Novico Fleet unit, with or without Terminal Connectivity.
CNG / H₂ Module
Complete alternative fuel intelligence for compressed natural gas and hydrogen fleets.
- Temperature-compensated fuel level (ideal gas law)
- Dual pressure monitoring — tank and rail
- Cylinder inspection tracking (FMVSS 304 / NGV2)
- OEM and Packager FSCM integration
- Leak detection between key cycles
PTO Module
Dedicated monitoring and reporting for power take-off equipped vehicles.
- PTO engagement time tracking
- PTO fuel consumption reporting
- Hydraulic pressure monitoring
- PTO-specific scoring in post-trip report
- Engine load during PTO operation
Reefer Module
Refrigerated trailer monitoring for temperature-sensitive cargo operations.
- Upgrade includes Remote Reefer Monitor hardware
- Wireless communication to in-dash gauge
- Refrigeration unit status monitoring
- Reefer data included in post-trip report
Novico Fleet Terminal
Automatic Data Harvesting — Zero Driver Interaction
The Novico Fleet Terminal sits in your maintenance bay or yard office. When an equipped vehicle pulls within range, every trip log, diagnostic code, and driver score downloads automatically — no one touches anything.
Requires Terminal Connectivity upgrade. No cloud. No subscription. AES-256 encrypted local storage.
Auto-Discovery
Detects Novico Fleet vehicles automatically when in range
No Cloud Required
AES-256 encrypted local storage — your data never leaves your facility
Qi Wireless Charging
Set it on the stand, always ready — no cables to manage
Export Anywhere
JSON, HTML, and PDF formats for your existing workflows